IntelliPoint RF RML Series
2.8
Sensing Element Connection (continued)
Housing and
Bracket are
shown rotated
90º for clarity.
Sensing Element Connection
(Remote Housing)
For IntelliPoint RF instruments that are mounted
remotely from the sensing element, the cable
connections from the sensing element to the electronic unit
are made to the terminals on the sensing element side of
the housing. See Figure 2-8. Connect Green (Ground) wire
to green screw, Red (Shield) wire to red screw, and Blue
(Center) wire to blue screw.
GSC
G=Ground
S=Shield
C=Center
SHIELD WIRE MUST BE CLIPPED BY USER
Figure 2-8
NOTE:
CLIPPED SHIELD WIRE
MUST NOT TOUCH
CONDULET HOUSING
13
Installation