Ametek IntelliPoint RF RML Series Installation And Operating Instructions Manual page 11

IntelliPoint RF RML Series
1.3 Model Number (continued)
Continued from Previous Page
R L
Not all mounting options available with all
sensing elements
NPT Threads
A1B ¾" NPT 316SS
A1C ¾" NPT
Hastelloy C
A1P ¾" NPT PFA
DIN Flanges
E01 25 mm 16 bar RF 316/316L SS
EP1 25 mm 40 bar RF 316/316L SS
EQ1
50 mm 16 bar RF 316/316L SS
ER1 50 mm 40 bar RF 316/316L SS
ES1 80 mm 16 bar RF 316/316L SS
ET1 80 mm 40 bar RF 316/316L SS
EU1 100 mm 16 bar
RF 316/316L SS
EV1 100 mm 40 bar RF 316/316L SS
EW1 150 mm 16 bar RF 316/316L SS
EX1 150 mm 40 bar
RF 316/316L SS
15 Heavy duty, agitated 700-0202-043 remote
tanks or material
with high bulk density (1)
16
High Integrity Seal for 700-0002-360 int/rem
Hazardous Materials
17 Sanitary (3) lowpressure 700-0202-036 int/rem 3.4 bar @ 149°C (50 PSI @ 300°F)
18 Corrosive material, 700-0001-022 int/rem 69 bar @ 38°C (1000 PSI @ 100°F)
higher pressure with
waterlike viscosity (4)
19 Interface Measurement 700-0002-023 int/rem
20
Miniature Pilot 700-0209-002 remote
Plant Sensor (1)(7)
Fly Ash Precipitators, Baghouse, and Economizers (1) (6)
Application Sensing Element
31 No hopper Installation 700-0029-001 remote
32 Hopper Installation 700-0029-002 remote
up to 200mm (8 inches)
33
Hopper Installation 700-0029-003 remote
up to 406mm (16 inches)
34 Hopper Instalation 700-0029-004 remote
up to 521mm (20.5 inches)
35
Hopper Installation 700-0029-005 remote
up to 635mm (25 inches)
Plugged Chute Detection (1) (5)
Application Sensing Element
50
Flush Mount Sensor 700-0207-001 remote
305mm 2 (12 inches 2 )
heavy duty
51
Flush Mount Sensor 700-0207-002 remote
305mm 2 (12 inches 2 )
higher temperature
52 Flush Mount Sensor 700-0207-003 remote
305mm 2 (12 inches 2 )
with curved radius 153, 229, 305 mm (6, 9, or 12 inches)
53 Flush Mount Sensor 700-0207-004 remote
305mm 2 (12 inches 2)
extra heavy duty
55 Flush Mount Sensor 700-0207-006 remote
203mm 2 (8 inches 2)
heavy duty
High Pressure / High Temperature
60 High Pressure & Temp. 700-0204-038 remote
61
High Temperature 700-0204-002 remote
62 High Pressure & Temp. 700-0204-048 remote
ZZ Sensing Element Not Listed
Mounting Type (See separate Mounting Chart for first three digits)
IL CSL
xxx1 457 mm (18") 152 mm (6")
xxx2 305 mm (12") 152 mm (6")
xxxA 152 mm (6") 51 mm (2")
xxxB 305 mm (12") 51 mm (2")
xxxC 305 mm (12") 89 mm (3.5")
xxxD 457 mm (18") 51 mm (2")
xxxE 457 mm (18") 89 mm (3.5")
xxxF 457 mm (18") 254 mm (10")
Notes: CSL (Cote-Shield Length) should extend through Nozzle + Typical "Wall Buildup" + 2 Inches
(1) Available with remote electronics only
(2) Use A1P mounting option
(3) Choose only sanitary mounting options
(4) Available with 0-inch CSL only
(5) Use P00X mounting option
A2B 1" NPT 316SS
A2C
1" NPT Hastelloy C
E02
25 mm 16 bar RF CS
EP2 25 mm 40 bar RF CS
EQ2 50 mm 16 bar RF CS
ER2 50 mm 40 bar RF CS
ES2
80 mm 16 bar RF CS
ET2 80 mm 40 bar RF CS
EU2 100 mm 16 bar RF CS
EV2 100 mm 40 bar RF CS
EW2 150 mm
16 bar RF CS
EX2 150 mm 40 bar RF CS
69 bar @ 38°C (1000 PSI @ 100°F)
13.8 bar @ 232°C (200 PSI @ 450°F)
34.5 bar @ 149°C (500 PSI @ 300°F)
34.5 bar @ 149°C (500 PSI @ 300°F)
69 bar @ 38°C (1000 PSI @ 100°F)
34.5 bar @ 149°C (500 PSI @ 300°F)
6.9 bar @ 121°C (100 PSI @ 250°F)
0 bar @ 232°C (0 PSI @ 450°F)
Pressure/Temperature
0.1 bar @ 260°C (2 PSI @ 500°F)
0.1 bar @ 260°C (2 PSI @ 500°F)
0.1 bar @ 260°C (2 PSI @ 500°F)
0.1 bar @ 260°C (2 PSI @ 500°F)
0.1 bar @ 260°C (2 PSI @ 500°F)
Pressure/Temperature
0.1 bar @ 82°C (1 PSI @ 180°F)
0.1 bar @ 149°C (1 PSI @ 300°F)
0.1 bar @ 82°C (1 PSI @ 180°F)
0.1 bar @ 82°C (1 PSI @ 180°F)
0.1 bar @ 82°C (1 PSI @ 180°F)
137.9 bar @ 93°C (2000 PSI @ 200°F) 316SS and Ceramic
68.9 bar @ 260°C (1000 PSI @ 500°F)
0 bar @ 816°C (0 PSI @ 1500°F)
275.8 bar @316°C (4000 PSI @ 600°F) 316SS
IL
xxxG 457 mm (18")
xxxH 914 mm (36") 254 mm (10")
xxxJ 914 mm (36")
xxxK 1219 mm (48") 254 mm (10")
xxxL 1524 mm (60") 254 mm (10")
P00X IL/CSL Other
A1BX IL/CSL factory set for Fly Ash
xxxZ Other
(6) Use A1B mounting option
(7) Use A8B mounting option (¼-inch NPT)
(8) Choose from flange mounting only
(9) FM approved with remote electronics only
Sanitary TriClamps
C2B 1" TriClamp 316SS C4B
C3B 1½" TriClamp 316SS
ANSI Flanges
DA1 1" 150# RF 316/316L SS
DB1 1½" 150#
RF 316/316L SS
DC1 2" 150# RF 316/316L SS
DD1 2½" 150# RF 316/316L SS
DE1 1" 300# RF 316/316L SS
DF1 1½" 300#
RF 316/316L SS
DG1 2" 300# RF 316/316L SS
DH1 2½" 300# RF 316/316L SS
DI1
3" 150# RF 316/316L SS
DJ1 3" 300# RF 316/316L SS
DK1 4" 150# RF 316/316L SS
DL1 4" 300# RF 316/316L SS
DM1 6"
150# RF 316/316L SS
DN1 6" 300# RF 316/316L SS
3
316SS and TFE
PFA
Introduction
316SS and TFE
TFE
316SS and TFE
316 SS and TFE
Wetted Parts
316SS and TFE
316SS and TFE
316SS and TFE
316SS and TFE
316SS and TFE
Wetted Parts
304 SS and
Polyurethane
304 SS and TFE
304 SS and Neoprene
410 SS and UHMW
Polyethylene
304 SS and
Polyurethane
316SS and Ceramic
CSL
0 mm (0")
0 mm (0")
2" TriClamp 316SS
DA2 1" 150# RF CS
DB2 1½" 150#
RF CS
DC2 2"
150# RF CS
DD2 2½" 150# RF CS
DE2 1" 300# RF CS
DF2 1½" 300#
RF CS
DG2 2" 300# RF CS
DH2 2½" 300# RF CS
DI2 3" 150# RF CS
DJ2 3"
300# RF CS
DK2 4" 150# RF CS
DL2 4" 300# RF CS
DM2 6" 150# RF CS
DN2 6"
300# RF CS