Initial Set Up/Information; Hdd Settings; Hdd Repeat Rec Main/Hdd Repeat Rec Sub/Hdd Repeat Rec Lpa; Hdd Repeat Play - Mitsubishi Electric DX-TL2500E Installation And Operation Manual

<INITIAL SET UP/INFORMATION>

HDD SETTINGS

HDD REPEAT REC MAIN/HDD REPEAT REC
SUB/HDD REPEAT REC LPA
The operation when HDD (Hard Disk Drive) space becomes
full during recording.
<HDD SETTINGS>
>> HDD REPEAT REC MAIN
HDD REPEAT REC SUB
HDD REPEAT REC LPA

HDD REPEAT PLAY

IM-CHECK PLAY

SEQUENTIAL PLAY
#1
FIFO OVERWRITE MODE
#2 ARCHIVE SOURCE HDD
#1
ARCHIVE START POSITION RESET
#1.Appears when "ARCHIVE•COPY" is set to
ID4•ID5 on the screen.
#2.Appears when "PARTITION" ("LONG PRE-ALARM")
is set and "ARCHIVE•COPY" is set to ID4•ID5
respectively on the screen.
"HDD REPEAT REC SUB" is appeared when
"PARTITION" ("LONG PRE-ALARM") is selected on
"HDD SETTING" of the <INITIALIZATION> screen.
"HDD REPEAT REC LPA" is appeared when
"LONG PRE-ALARM" is selected on "HDD SET-
TING" of the <INITIALIZATION> screen after install-
ing EXTRA HDD to "INTERNAL HDD A".
Setting ( default of HDD REPEAT REC MAIN : "ON", default of
HDD REPEAT REC SUB and HDD REPEAT REC LPA : "OFF")
"ON" : Automatically returns to the beginning of the
HDD and resumes recording (by overwriting old data).
"STANDBY" : When the HDD space becomes empty,
recording is stopped and the unit switches to the
standby mode. Recording is resumed when the REC
terminal is grounded or the REC button is pressed.
Recording is temporarily stopped if the alarm input is
continuously grounded or during timer recording. Then,
recording is resumed from the beginning of the HDD.
"OFF" : Recording is stopped and "REC/FULL",
"REC/SUB FULL" or "REC/LPA FULL" is displayed
on the screen. To resume recording, press the
WARNING RESET button to cancel the warning dis-
play and press the REC button.
If either the WARNING "REC/FULL", "REC/SUB
FULL" or "REC/LPA FULL" appears when the ALARM
PARTITION is set, recording on both will stop.
"STANDBY" is displayed only in "HDD REPEAT
REC MAIN".
1. Press the SET UP button } <SETTINGS> } <INITIAL SET
UP/INFORMATION> } Select "HDD REPEAT REC MAIN", "HDD
REPEAT REC SUB" or "HDD REPEAT REC LPA" in the <HDD
SETTINGS> screen. Display the desired setting and confirm.
2. Turn the SHUTTLE ring counterclockwise or press the SET
UP button.
HDD REPEAT PLAY
The contents recorded on the HDD (Hard Disk Drive) can
be repeatedly played back.
•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• Operations
#1
#2
#1
ON
OFF
OFF
#1.Appears when "ARCHIVE•COPY" is set to
OFF
OFF
OFF #2.Appears when "PARTITION" ("LONG PRE-ALARM")
OFF
MAIN
Setting ( default : "OFF" )
"ON" : After the recorded data is played back to the
end, playback is resumed by automatically return-
ing to the beginning of the recorded data.
"OFF" : After the recorded data is played back to
the end, playback is stopped.
1. Press the SET UP button } <SETTINGS> } <INITIAL SET
UP/INFORMATION> } Select "HDD REPEAT PLAY" in the <HDD
SETTINGS> screen. Display the desired setting and confirm.
2. Turn the SHUTTLE ring counterclockwise or press the SET
UP button.
IM-CHECK PLAY
This function is to check whether alterations have been made
to the recorded video or the recording date/time. "IMAGE
MODIFIED" warning is displayed when alteration is checked.
#1
#2
#1
#1.Appears when "ARCHIVE•COPY" is set to
#2.Appears when "PARTITION" ("LONG PRE-ALARM")
Setting ( default : "OFF" )
"ON" : Alteration check is performed during play-
back and displays a warning at the point containing
alteration.
"OFF" : Alteration check is not performed.
This function may cause problems during record-
ing and playback. Normally, set this function to "OFF".
1. Press the SET UP button } <SETTINGS> } <INITIAL SET
UP/INFORMATION> } Select "IM-CHECK PLAY" in the <HDD
SETTINGS> screen. Display the desired setting and confirm.
2. Turn the SHUTTLE ring counterclockwise or press the SET
UP button.
3. Select the device for alteration check and then start
playback.
<HDD SETTINGS>
HDD REPEAT REC MAIN
HDD REPEAT REC SUB
HDD REPEAT REC LPA
>> HDD REPEAT PLAY
IM-CHECK PLAY
SEQUENTIAL PLAY
FIFO OVERWRITE MODE
ARCHIVE SOURCE HDD
ARCHIVE START POSITION RESET
ID4•ID5 on the screen.
is set and "ARCHIVE•COPY" is set to ID4•ID5
respectively on the screen.
<HDD SETTINGS>
HDD REPEAT REC MAIN
HDD REPEAT REC SUB
HDD REPEAT REC LPA
HDD REPEAT PLAY
>> IM-CHECK PLAY
SEQUENTIAL PLAY
FIFO OVERWRITE MODE
ARCHIVE SOURCE HDD
ARCHIVE START POSITION RESET
ID4•ID5 on the screen.
is set and "ARCHIVE•COPY" is set to ID4•ID5
respectively on the screen.
ON
OFF
OFF
OFF
OFF
OFF
OFF
MAIN
ON
OFF
OFF
OFF
OFF
OFF
OFF
MAIN
49