Toshiba LQ300A00 Series Operation Manual page 6

Safety Precautions (Continued)
For a safe use of the LQ300A00****** Density Meter, take precautions described in this manual and
observe ordinances in making the installation and operation. Toshiba is not responsible for any accident
arising from the use that does not conform to above.
INSTALLATION PRECAUTIONS
■ The meter is heavy. To move them or
relocate them may need a qualified operator
for handling a crane, a hoist or a truck for safe
operation.
DO
■ When hoisting this unit, use the hoisting
bands.
In addition, when hoisting the unit with
hoisting bands, tighten the bands so that the
bands will not be loosened or slipped off.
DO
Overturning or dropping can cause injuries or
equipment failure.
■ Avoid installing the meter in any of the
following places:
l Dusty place
DO
l Place where corrosive gases (SO2, H2S)
or flammable gases may be generated.
l Place exposed to vibration or shock that
exceeds permissible level.
l Place exposed to condensation due to
abrupt change in temperature.
l Place too cold or hot for installation
l Place too humid for installation
l Near an apparatus that generates strong
radio waves or strong magnetic field.
Otherwise, a fire or equipment breakdown
or failure can occur.
WARNING
Red
CAUTION
Yellow
 4 
■ Electrical and mechanical constructions
are necessary for the meter.
Please consult your vender or Toshiba
sales representative.
Inadequate construction can cause electric
DO
shock and fire.
■ Do not operate where there is a
possibility of leakage of flammable or
explosive gas.
DON'T
A fire or explosion can occur.
■ Install the meter in a place that is good
for operation, maintenance and inspection.
A stumble or an overturn can cause injuries.
DO
6 F 8 A 0 7 8 7