Table of Contents
Advertisement
5.2.3
Menu display
The menu display of the converter LCD display section has a hierarchical structure as shown in Table
5.2.3.
Note: Occasionally using some abbreviated terms as well, actual LCD displays differ from Table 5.2.3.
For details, refer to Section 5.2.4. The symbols in parentheses in Table 5.2.3 correspond to those
displayed on the upper left corner of their respective LCD screens.
Menu 1
Menu 2
Read
parameters
Monitoring
menu
Measured
value
Self-diagnosis
data
Table 5.2.3 Menu Display (1)
Menu 3
Density multiplier (C)
Upper density measurement range (UR)
Lower density measurement range (LR)
Density line slope (a)
Density intercept (b)
Density test output (ot)
Delayed time in external synchronized
operation (dt)
Zero-point phase θ
(zp)
1
Zero-point liquid temperature T
RF correction factor (cG)
Zero-point RF data (zG)
Moving average times (ma)
Permissible width of change-rate limit (dx)
Limit times of change-rate limit (HL)
Phase θ
(p), liquid temperature (T),
2
atmospheric temperature (A), density (X)
Operation status (ST)
Microwave signal level (SL)
Micro wave factor (F)
RF data(G)
+5V power supply voltage(J)
Reference phase error (pd)
Memory check (Mc)
(zT)
0
35
6 F 8 A 0 7 8 7
Menu 4
Advertisement
Table of Contents
