Manufacturer And Service; For Your Safety; Intended Use; General Safety Notes - turck Li-Q25LxE Series Operating Instructions Manual

2.4

Manufacturer and service

Turck supports you in your projects – from the initial analysis right through to the commis-
sioning of your application. The Turck product database offers you several software tools for
programming, configuring or commissioning, as well as data sheets and CAD files in different
export formats.
You can access the Product Database directly via the following address:
www.turck.de/products
For further inquiries in Germany contact the Sales and Service Team on:
Sales:
Technical: +49 208 4952-390
For overseas inquiries contact your national Turck representative.
Hans Turck GmbH & Co. KG
Witzlebenstraße 7
45472 Mülheim an der Ruhr
Germany
3

For Your Safety

The product is designed according to state of the art technology. Residual hazards, however,
still exist. Observe the following warnings and safety regulations in order to prevent danger to
persons and property. Turck accepts no liability for damage caused by failure to observe these
warnings and safety instructions.
3.1

Intended use

The devices are designed only for use in industrial areas.
The Li-Q25...E inductive linear position sensors with an analog output are used for contactless
and wear-free linear position measuring.
The device must only be used as described in these instructions. Any other use is not in accor-
dance with the intended use. Turck accepts no liability for any resulting damage.
3.2

General safety notes

■
The devices are not safety components and must not be used for the protection of persons
and property.
■
The device must only be fitted, installed, operated, maintained and parameterized by trained
and qualified personnel.
■
The device only fulfills the EMC requirements for industrial applications and is not suitable for
use in residential areas.
2018/10
+49 208 4952-380
7