turck LTX-R10 Series Instructions For Use Manual
Linear position sensors with ssi interface
Hide thumbs
Also See for LTX-R10 Series:
- Instructions for use manual (30 pages) ,
- Manual (20 pages) ,
- Operating instructions manual (24 pages)
Related Manuals for turck LTX-R10 Series
Summary of Contents for turck LTX-R10 Series
- Page 1 Your Global Automation Partner Linear Position Sensors with SSI Interface Instructions for Use...
- Page 2 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com...
-
Page 3: Table Of Contents
Operation ............................ 24 LED indication ........................ 24 Troubleshooting .......................... 25 Replacing the sensor head and measuring element .......... 25 10 Maintenance............................ 26 11 Repair.............................. 26 11.1 Returning devices...................... 26 12 Disposal .............................. 26 13 Technical data ........................... 27 13.1 Update time........................ 27 14 Turck subsidiaries – contact information.................. 28 V07.00 | 2022/01... - Page 4 Contents Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com...
-
Page 5: About These Instructions
This symbol denotes actions that the user must carry out. RESULTS OF ACTION This symbol denotes relevant results of actions. Other documents Besides this document, the following material can be found on the Internet at www.turck.com: Data sheet Declarations of conformity Approvals... -
Page 6: Notes On The Product
Types with manufacturer compatible connectors and models with customized blind zones are available on request. The LTX…M-F10-SSI2-GAF1-X3-H1161 devices are preference types. Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com... -
Page 7: Scope Of Delivery
The scope of delivery includes: Linear position sensor (without positioning element) Quick Start Guide Turck service Turck supports you with your projects, from initial analysis to the commissioning of your applic- ation. The Turck product database under www.turck.com contains software tools for program- ming, configuration or commissioning, data sheets and CAD files in numerous export formats. -
Page 8: For Your Safety
The device may only be used in accordance with applicable national and international regu- lations, standards and laws. Only operate the device within the limits stated in the technical specifications. Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com... -
Page 9: Product Description
The devices can be connected using an M12 plug connector. All devices feature a rod design with IP68 protection. The devices have contactless operation, which requires the use of a posi- tioning element approved by Turck (see section “Technical accessories”). The devices operate in absolute mode, power failures do not require renewed homing or recal- ibration. -
Page 10: Properties And Features
SSI interface. All posi- tion values are determined as absolute values, homing runs after a voltage drop are unneces- sary. Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com... -
Page 11: Automatic Signal Control
NOTE Turck recommends operating the device in asynchronous update mode if no highly dynamic control requirements are involved. SSI Clock... -
Page 12: Measuring Functions
Measuring range Configured 10…500 mm In 25 mm steps 500…2000 mm In 50 mm steps 2000…7600 mm In 500 mm steps Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com... -
Page 13: Technical Accessories
Technical accessories The following accessories are not supplied with the device: Positioning element Dimension drawing Type Description STM-AL-R10 6900409 Standard 4-hole positioning element, aluminum, suitable for mounting in the ø 32,8 hydraulic cylinder ø 4,7 ø 23,8 ø 13,5 16,8 CM-R10 6900416 Standard positioning element, suitable for... - Page 14 ø 4,7 piston rod, suitable for mounting in the ø 23,8 hydraulic cylinder ø 13,5 16,8 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com...
- Page 15 6-pin, cable length: 2 m, sheathing M12 x 1 ø 15 material: PUR, black, cULus approval, other cable lengths and types available, 11.5 www.turck.com RKC6T-2/S618 U5311-51 Connection cable, M12 female connector, straight, 6-pin, cable length: 2 m, sheathing M12 x 1 ø 15...
-
Page 16: Installing
Fig. 6: Type with flat face (F10) – housing nut with thread 2.5 [.10] 7.1 [.28] ø 25.4 [1.00] Fig. 7: Type with raised face (R10) – housing nut with thread Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com... -
Page 17: Mounting The Device In A Hydraulic Cylinder
Mounting the device in a hydraulic cylinder NOTICE Incorrect mounting Risk of damage to the hydraulic cylinder „ Observe the instructions of the cylinder manufacturer and the hydraulic cylinder specifications. The devices can be mounted directly in a hydraulic cylinder. For this a hole with a recommen- ded diameter of 13.5 mm must be provided in the cylinder piston rod (depending on the cylinder design). -
Page 18: Mounting The Sensor
Viton O ring Protective ring (optional) 4-hole positioning element Spacer for positioning element 13.5 mm hole in the cylinder piston rod Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com... -
Page 19: Fastening The Device With Mounting Bracket Externally
Fastening the device with mounting bracket externally NOTICE Magnetization of the metal in close proximity of the probe Inaccurate measurements „ Mount the sensor probe at least 7 mm away from ferromagnetic material. NOTE Non-ferrous materials, such as brass, copper, aluminum, demagnetized stainless steel or plastic do not impair the function of the sensor. -
Page 20: Mounting Additional Mounting Brackets (For External Mounting)
Sensors with probe lengths of 750…1800 mm: Fit additional mounting brackets as per fig. 10. „ Sensors with probe lengths > 1800 mm: Fit mounting brackets at distances of 1200 mm. Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com... -
Page 21: Installing The Positioning Element (For External Mounting)
5.2.2 Installing the positioning element (for external mounting) „ Observe a distance of 7 mm between the positioning element and ferrous material. If necessary, use a spacer. „ Observe a distance of 7 mm between the end of the probe and ferrous material. The positioning element must not touch the sensor along the entire measuring range. -
Page 22: Connection
1 BN 4 BK Data – 5 GY Clock – 6 PK Clock + Fig. 11: Pin assignment Fig. 12: Wiring diagram Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com... -
Page 23: Commissioning
Commissioning NOTE If the device is part of a closed and not yet fully configured system, the system may move in an uncontrolled manner the first time the power supply is connected. The device is operational automatically once the cables are connected and the power supply is switched on. -
Page 24: Operation
1 s to 0.12 s), proceed as follows: „ Increase the update time via the module settings of the SSI master. Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com... -
Page 25: Troubleshooting
Troubleshooting If the device does not operate as expected, check the LED feedback signal (see the section “LED indication”) Check whether any ambient interference is present. If there is no ambient interfer- ence present, check the connections of the device for faults. If there are no faults, there is a device malfunction. -
Page 26: Maintenance
Disposal The devices must be disposed of correctly and must not be included in general household garbage. Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com... -
Page 27: Technical Data
Technical data Technical data LTX-R10…/LTX-F10… LTX-ER10…/LTX-EF10… Measuring range Blind zone (connector end) 50.8 mm Blind zone (end) 63.5 mm Resolution Selectable, see type code Linearity ≤ 0.01 % of full scale Operating temperature, rod -40…+105 °C Operating temperature, -40…+85 °C electronics Temperature drift ≤... -
Page 28: Turck Subsidiaries - Contact Information
Turck Banner Malaysia Sdn Bhd Unit A-23A-08, Tower A, Pinnacle Petaling Jaya, Jalan Utara C, 46200 Petaling Jaya Selangor www.turckbanner.my Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com... - Page 29 Mexico Turck Comercial, S. de RL de CV Blvd. Campestre No. 100, Parque Industrial SERVER, C.P. 25350 Arteaga, Coahuila www.turck.com.mx Netherlands Turck B. V. Ruiterlaan 7, NL-8019 BN Zwolle www.turck.nl Austria Turck GmbH Graumanngasse 7/A5-1, A-1150 Wien www.turck.at Poland TURCK sp.z.o.o.
- Page 30 Over 30 subsidiaries and over 60 representations worldwide! D101913 | 2022/01 D101913 www.turck.com...
Need help?
Do you have a question about the LTX-R10 Series and is the answer not in the manual?
Questions and answers