This symbol denotes actions that the user must carry out. RESULTS OF ACTION This symbol denotes relevant results of actions. Other documents Besides this document the following material can be found on the Internet at www.turck.com: Data sheet Commissioning manual IO-Link devices IO-Link parameters manual...
CAD files in numerous export formats. The contact details of Turck subsidiaries worldwide can be found on p. [} 46]. Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com...
The product is designed according to state-of-the-art technology. However, residual risks still exist. Observe the following warnings and safety notices to prevent damage to persons and property. Turck accepts no liability for damage caused by failure to observe these warning and safety notices.
Gutbereich acceptable range Fig. 5: Behavior of the switching output – window function Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com...
Hysteresis function The hysteresis function is used to teach in a stable switching state that is not affected by sys- tem-related fluctuations and the defined setpoint. The switching range is defined with a switching point and a reset point. The minimum hysteresis is 0.5 % of the measuring range. If the switching point is changed, the reset point is automatically adjusted.
More information on this is available from the Turck product database at www.turck.de/products in the Connectivity area. Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com...
Installing The lens curvature does not have to be taken into account for the installation. The sensor de- tects the surface of the medium nearest to the sensor and outputs the distance. Object reflec- tions can be filtered out using the sensor parameters. The sensors can be installed in any alignment according to application requirements.
Burden at the analog output outside of the permissible range ErrT No object detected Short circuit Device locked uLoc Device unlocked - - - - Sensor failure Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com...
Setting and Parameterization Settable functions and features Setting options via touchpads and IO-Link interface The following functions and properties can be set and used both in standard I/O mode as well as in IO-Link mode: Locking/unlocking the device Window function Hysteresis function Analog range Advanced settings: Reset to the previous settings (presettings)
Release the touchpads when six green bars are flashing on the display. LOC LED goes out. uLoc appears in the display and goes out. Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com...
9.2.3 Standard menu – overview Standard menu guidance – main menu Process value > 3 s Current value Save value SP1/FH1 rP1/FL1 > 3 s Current value Save value … Auto 4…20 … rtio SP2/FH2 rP2/FL2 > 3 s Current value ou3 (option) Save value SP3/FH3...
Page 20
FACT Current value > 3 s Software version VDMA Save value years days hours OPHr Fig. 17: EF extended functions menu Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com...
9.2.4 VDMA menu – overview VDMA menu – main menu Process value SP1/FH1 rP1/FL1 SP2/FH2/ASP rP2/FL2/AEP SP3/FH3 rP3/FL3 SP4/FH4 rP4/FL4 Fig. 18: VDMA main menu V01.00 | 2021/07...
Page 22
Save value > 3 s Software PASS version VDMA Save value years days hours OPHr Fig. 19: VDMA EF extended functions menu Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com...
9.2.5 Setting parameter values via touchpads Turck standard menu Unlock the device when [MODE] or [SET] is touched, a red running light appears and the LOC LED is lit. Touch [MODE] or [SET] until the required parameter is displayed.
Set value Set value hBot LnGt Set value Set value DToP FLAT DISH Set value hToP Set value Fig. 22: GEOM menu Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com...
9.2.7 Protecting the sensor with a password Select PASS in the EF menu. Change values via [SET]. Use [MODE] to navigate between the four digits of the password. Use [ENTER] to store the new password. > 3 s Gradually upwards (hex.) Pos.
Hysteresis function (NO = NO contact) Hysteresis function (NC = NC contact) Window function (NO = NO contact) Window function (NC = NC contact) Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com...
Page 27
Explanation Options Function Function of output 4 Hysteresis function (NO = NO contact) Hysteresis function (NC = NC contact) Window function (NO = NO contact) Window function (NC = NC contact) Submenu for additional See table “Parameters in the EF submenu” setting options V01.00 | 2021/07...
0…8 s in increments of 0.01 s (0 = filter is deactivated) Default: 0.0 Behavior of the switching output Auto Automatic detection (NPN/PNP) N switching P switching Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com...
Page 29
Explanation Options Function Display orientation Display rotated by 0° diSr 0° 180° Display rotated by 180° diSu Measured value display 50 ms update time 200 ms update time 600 ms update time Display update deactivated coLr Display color GrEn Always green Always red G1ou Green if ou1 is switched, otherwise red...
Diameter of cylindrical and spherical containers; DIA (CYLV, CYLH, SPHR) must be ≥ FuLL for CYLH and SPHR. Default: 564.1895 mm Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com...
Page 31
Explanation Options Function Container length Total length of cylindrical containers; with CYLV LnGt LnGt (CYLV, CYLH) must be ≥ FuLL. Default: Measuring range minus blind zone Type of container bottom FLAT Flat bottom (CYLV, CYLH) DISH Two dish-shaped (convex bottoms at both ends) DBot Diameter at the bottom edge of Lower diameter of conical containers...
Enter the password in the Login field on the start page of the web server. The default password is “password”. Click Login. Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com...
9.4.2 Reading in IODD in the web server Set the input port of the IO-Link master as an IO-Link port. Open the IODD Configurator tab in the web server. Fig. 28: Web server – IODD Configurator V01.00 | 2021/07...
Page 34
Setting and visualization with the Turck Radar Monitor Load the specific device IODD in the web server via Load IODD. Fig. 29: Loading IODD Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com...
9.4.3 Turck Radar Monitor – overview The Turck Radar Monitor makes it possible to visualize the process data and filter signals. The display consists of: FFT diagram and envelope curve Object detection To launch the Turck Radar Monitor, choose Radar monitor.
The signal limits are displayed in a white area in the Turck Radar Monitor. Peaks without a blue bar are not forwarded for data processing. Fig. 31: Example– filtering signals Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com...
Troubleshooting If the device does not function as expected, first check whether ambient interference is present. If there is no ambient interference present, check the connections of the device for faults. If there are no faults, there is a device malfunction. In this case, decommission the device and replace it with a new device of the same type.
Disposal The devices must be disposed of correctly and must not be included in general household garbage. Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com...
Technical Data 14.1 Technical data – LRS510-10-…-2UPN8-H1141 Technical data LRS510-10-34… LRS510-10-51… LRS510-10-57… LRS510-10-69… Ident No. 100012732 100012731 100012726 100012725 Radar data Frequency range 122…123 GHz Range 35…1000 cm Resolution 1 mm Minimum size 500 mm measuring range Minimum size 500 mm switching range Linearity tolerance ≤...
20 g (10…2000 Hz), EN 600068-2-6 EN 61000-6-2:2019 ETSI EN 301489-3 V1.6.1 Approvals CE, UL, ETSI I 305550-2, FCC/CFR. 47 Part 15 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com...
14.2 Technical data – LRS510-10-…-4UPN8-H1181 Technical data LRS510-10-34… LRS510-10-51… LRS510-10-57… LRS510-10-69… Ident No. 100012734 100012733 100012728 100012727 Radar data Frequency range 122…123 GHz Range 35…1000 cm Resolution 1 mm Minimum size 500 mm measuring range Minimum size 500 mm switching range Linearity tolerance ≤...
Page 42
20 g (10…2000 Hz), EN 600068-2-6 EN 61000-6-2:2019 ETSI EN 301489-3 V1.6.1 Approvals CE, UL, ETSI I 305550-2, FCC/CFR. 47 Part 15 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com...
Page 43
14.3 Technical data – LRS510-10-…-LI2UPN8-H1141 Technical data LRS510-10-34… LRS510-10-51… LRS510-10-57… LRS510-10-69… Ident No. 100012730 100012729 100012723 100012722 Radar data Frequency range 122…123 GHz Range 35…1000 cm Resolution 1 mm Minimum size 500 mm measuring range Minimum size 500 mm switching range Linearity tolerance ≤...
Page 44
20 g (10…2000 Hz), EN 600068-2-6 EN 61000-6-2:2019 ETSI EN 301489-3 V1.6.1 Approvals CE, UL, ETSI I 305550-2, FCC/CFR. 47 Part 15 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com...
15.1 EU Declaration of Conformity Hans Turck GmbH & Co. KG hereby declares that the level sensors of the LRS510-… series comply with Directive 2014/53/EU. The complete text of the EU declaration of conformity can be obtained from the following Internet address: www.turck.com...
Turck Banner Malaysia Sdn Bhd Unit A-23A-08, Tower A, Pinnacle Petaling Jaya, Jalan Utara C, 46200 Petaling Jaya Selangor www.turckbanner.my Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com...
Page 47
Mexico Turck Comercial, S. de RL de CV Blvd. Campestre No. 100, Parque Industrial SERVER, C.P. 25350 Arteaga, Coahuila www.turck.com.mx Netherlands Turck B. V. Ruiterlaan 7, NL-8019 BN Zwolle www.turck.nl Austria Turck GmbH Graumanngasse 7/A5-1, A-1150 Wien www.turck.at Poland TURCK sp.z.o.o.
Page 48
Over 30 subsidiaries and over 60 representations worldwide! 100018911 | 2021/07 100018911 www.turck.com...