Connection - turck Li-Q25LxE Series Operating Instructions Manual

6

Connection

Connect the female connector of the connection cable to the male connector of the device.
➤ ➤
If required, connect the TX1-Q20L60 teach adapter between the female connector of the con-
➤ ➤
nection cable and the plug connector of the device.
Connect the sensor as per Figure 4.
➤ ➤
Pin layout
3 BU
5 GY
Fig. 4:
14
NOTE
Turck recommends the use of shielded connection cables.
NOTE
Keep pin 5 potential-free during operation in order to prevent any accidental teach
➤ ➤
operations, or activate Teach Lock (see chapter 9.1.4/9.2.4).
Wiring diagram
2 WH
1 BN
4 BK
Pin layout and wiring diagram
Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com
1 BN
+
4 BK
2 WH I U
–
3 BU
5 GY
ext. teach