turck LI-Q25L-IOLX3 Series Instructions For Use Manual

Linear position sensors with io-link interface

Advertisement

Quick Links

Your Global Automation Partner
LI...-Q25L...-IOLX3-...
Linear Position Sensors
with IO-Link Interface
Instructions for Use

Advertisement

Table of Contents
loading

Summary of Contents for turck LI-Q25L-IOLX3 Series

  • Page 1 Your Global Automation Partner LI…-Q25L…-IOLX3-… Linear Position Sensors with IO-Link Interface Instructions for Use...
  • Page 2 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com...
  • Page 3: Table Of Contents

    LED indications ...................... 17 Setting and Parameterization ...................... 18 Settable functions and features ................. 18 Setting via IO-Link...................... 18 10 Troubleshooting .......................... 19 11 Maintenance............................ 20 12 Repair.............................. 20 12.1 Returning devices...................... 20 13 Disposal .............................. 20 14 Technical Data........................... 21 15 Turck Subsidiaries - Contact Information .................. 23 V01.01 | 2021/09...
  • Page 4 Contents Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com...
  • Page 5: About These Instructions

    This symbol denotes actions that the user must carry out. RESULTS OF ACTION This symbol denotes relevant results of actions. Other documents Besides this document the following material can be found on the Internet at www.turck.com: Data sheet IO-Link parameters manual Commissioning manual IO-Link devices...
  • Page 6: Notes On The Product

    CAD files in numerous export formats. The contact details of Turck subsidiaries worldwide can be found on p. [} 23]. Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com...
  • Page 7: For Your Safety

    The product is designed according to state-of-the-art technology. However, residual risks still exist. Observe the following warnings and safety notices to prevent damage to persons and property. Turck accepts no liability for damage caused by failure to observe these warning and safety notices.
  • Page 8: Product Description

    Fig. 1: Dimensions in mm – L = 29 mm + measuring length + 29 mm 45.7 38.6 33.8 25.2 Fig. 2: Dimensions – device height Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com...
  • Page 9: Properties And Features

    Properties and features Rectangular, aluminum/plastic Versatile mounting possibilities Measuring range indication via LED Immune to electromagnetic interference Short blind zones Process value in 32-bit IO-Link telegram 15…30 VDC Male connector, M12 × 1, 4-pin Operating principle The LI-Q25L linear position sensors have contactless operation based on the inductive resonant circuit measuring principle.
  • Page 10: Technical Accessories

    20,7 40,4 M1-Q25L 6901045 Mounting foot for LI-Q25L linear position sensors; material: aluminum; 2 per bag 10,6 31,2 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com...
  • Page 11 Dimension drawing Type Description M2-Q25L 6901046 Mounting foot for LI-Q25L linear position sensors; material: aluminum; 2 per bag 10,6 42,5 31,2 ø 4,5 M4-Q25L 6901048 Mounting bracket and sliding block for LI-Q25L linear position sensors; material: stainless steel; 2 per bag ø...
  • Page 12: Connection Accessories

    Compact IP20 multiprotocol Ethernet I/O station, 4 IO-Link master channels 30 [1.18] 19.5 [0.77] 55 [2.17] 44.5 [1.75] 62.5 [2.46] Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com...
  • Page 13 2 m, sheathing material: PVC, black; M12 x 1 ø 15 cULus approval; other cable lengths and types available, 11.5 www.turck.com RKC4T-2-RSC4T/TXL Connection cable, M12 female con- nector, straight, 3-pin, M12 male con- nector, straight, 3-pin, cable length: ø 15 M12 x 1 ø...
  • Page 14: Installing

    Recommended tightening torque M1-Q25L 3 Nm M2-Q25L 3 Nm MN-M4-Q25L 2.2 Nm Sensor type Recommended number of fixings LI100…LI500 LI600…LI1000 LI1250…LI1500 LI1750…LI2000 Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com...
  • Page 15: Connection

    Connection „ Ensure that the entire plant is in a de-energized state during the electrical installation of the sensor. „ Connect the female connector of the connection cable to the male connector of the sensor. „ Connect the open end of the connection cable to the power supply and/or processing units.
  • Page 16: Commissioning

    Commissioning Commissioning After connecting and switching on the power supply, the device is automatically ready for op- eration. Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com...
  • Page 17: Operation

    Operation LED indications LED 2 LED 1 Fig. 7: LEDs 1 and 2 Indication Meaning LED 1 Green Positioning element in the measuring range Yellow Positioning element in the measuring range with reduced signal quality (e.g. distance to sensor too large) Yellow flashing Positioning element not in detection range Positioning element outside of set measuring range...
  • Page 18: Setting And Parameterization

    IO-Link commissioning manual. All the parameters can changed in IO-Link mode via the controller during commissioning as well as during operation. Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com...
  • Page 19: Troubleshooting

    Troubleshooting The strength of the resonance coupling is indicated by an LED. Any faults are indicated via the LEDs. If the device does not function as expected, first check whether ambient interference is present. If there is no ambient interference present, check the connections of the device for faults. If there are no faults, there is a device malfunction.
  • Page 20: Maintenance

    Disposal The devices must be disposed of correctly and must not be included in general household garbage. Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com...
  • Page 21: Technical Data

    Technical Data Device-specific technical data Technical Data Type Measuring Linearity deviation Dimensions range (also when subject to shock and vibration) LI100P0-Q25LM0-IOLX3-H1141 100012822 100 mm ≤ 0.12 % of full scale 158 × 35 × 25 mm LI200P0-Q25LM0-IOLX3-H1141 100012823 200 mm ≤...
  • Page 22 200 g; 4 ms ½, sinusoidal Protection type IP67 MTTF 138 years acc. to SN 29500 (Ed. 99) 20 °C Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com...
  • Page 23: Turck Subsidiaries - Contact Information

    Turck Subsidiaries - Contact Information Germany Hans Turck GmbH & Co. KG Witzlebenstraße 7, 45472 Mülheim an der Ruhr www.turck.de Turck Australia Pty Ltd Australia Building 4, 19-25 Duerdin Street, Notting Hill, 3168 Victoria www.turck.com.au Belgium TURCK MULTIPROX Lion d'Orweg 12, B-9300 Aalst www.multiprox.be...
  • Page 24 Árpád fejedelem útja 26-28., Óbuda Gate, 2. em., H-1023 Budapest www.turck.hu Turck Inc. 3000 Campus Drive, USA-MN 55441 Minneapolis www.turck.us Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com...
  • Page 25 Over 30 subsidiaries and over 60 representations worldwide! 100025660 | 2021/09 100025660 www.turck.com...

Table of Contents