Warning; International Electrical Symbols - AEMC 725 User Manual

Warning

These safety warnings are provided to ensure the safety of personnel
and proper operation of the instrument.
• Read this instruction manual completely before attempting to use
or service this instrument, and follow all the safety information.
• Use caution on any circuit: Potentially high voltages and currents
may be present and may pose a shock hazard.
• The instrument must not be operated beyond its specified operat-
ing range. Never exceed 1000 Arms/1500 A DC or 600 Volts.
• Safety is the responsibility of the operator.
• Never open the back of the instrument while connected to any cir-
cuit or input.
• ALWAYS make connections from the instrument to the circuit under
test.
• ALWAYS inspect the instrument and accessory leads for serviceabil-
ity prior to use, and replace defective parts immediately.
• Never use the Model 725 on electrical conductors rated above 600
Vrms.

International Electrical Symbols

This symbol signifies that the Model 725 is protected throughout by
double or reinforced insulation. Only use specified replacement
parts when servicing the meter.
This symbol signifies CAUTION! and requests that the user refer to
!
the user manual before using the meter.
Clamp-On Harmonic Probe Model
3