Dc Voltage Measurements - AEMC 725 User Manual

DC Voltage Measurements

OBSERVE ALL SAFETY PRECAUTIONS AND WARNINGS
Operating Procedure
1) The voltage input connectors are color-coded 4 mm banana jacks
located on the base of the instrument. When making voltage connec-
tions, be sure to observe the proper polarity and connection integrity.
Select the appropriate lead termination (test probe or clips) for the
application. Insert the RED test lead into the
test lead into the
2) Turn on the instrument using the rotary selector to the voltage mea-
surement function V
exiting OFF.
3) Touch or connect the voltage test leads to the circuit under test.
4) Take a reading from the display. Voltage measurements are possible
from 50 mV to 600 V DC.
Clamp-On Harmonic Probe Model
DCV
jack.
COM
. Selection is confirmed with a short beep when
- - -
OFF
~
V
~
A
Model 725 Model 725
AEMC
HARMONIC METER HARMONIC METER
I N S T R U M E N T S
– – + + P TDHF K FACTOR
kHz
AV%
HOLD ODD
V
RECORD-PAUSE MAX MIN AVG
RANGE SMOOTH THDF CFF RIPPLE AC + DC
% % + +
– –
AV RMS
PEAK
0 1 2 3 4 5 600
AV A
+
-
+
jack and the BLACK
23