Repair, Maintenance & Calibration - AEMC 725 User Manual

Repair, Maintenance & Calibration
WARNING
• To avoid electrical shock, do not attempt to perform any servicing
unless you are qualified to do so.
• To avoid electrical shock and/or damage to the probe, do not get
water or other foreign agents into the case. Turn the Model 725 OFF
and disconnect the meter from all circuits and inputs before opening
the case.
Maintenance
To clean the Model 725, wipe the case and jaw covers with a damp cloth
and mild detergent. Do not use any abrasives or solvents.
Repair and Calibration
To guarantee that your instrument complies with the factory specifica-
tions, we recommend that the Model 725 be submitted to our factory ser-
vice center at one-year intervals for recalibration.
Estimates for repairs, normal recalibration, and calibration traceable to
NIST are available upon request. Overseas customers must receive autho-
rization by fax or letter before returning any instrument.
For all servicing, please contact our factory:
Chauvin Arnoux, Inc., d.b.a AEMC Instruments
15 Faraday Drive
Dover, NH 03820, USA
(603)749-6434 • Fax (603)742-2346
Clamp-On Harmonic Probe Model
43