Table of Contents
Advertisement
• These safety warnings are provided to ensure the safety of personnel
and proper operation of the instrument.
• Do not attempt to perform any tests with this instrument until you have
read the instruction manual.
• Tests are to be carried out on non-live and de-energized circuits only!
• The micro-ohmmeter should never be used in an explosive
environment (this includes poorly ventilated battery rooms and
enclosures).
• Make sure the internal battery is fully charged prior to testing. If the
instrument has been unused for several months, recharge the battery.
• We recommend recharging the micro-ohmmeter every month to
ensure a full battery charge when used.
• Only install fuses which are direct replacements.
• If the case needs cleaning, do not use any alcohol or oil based
cleaners. Preferably use soapy water with a damp cloth or sponge.
International Electrical Symbols
This symbol signifies that the instrument is protected by double
or reinforced insulation. Use only specified replacement parts
when servicing the instrument.
This symbol signifies CAUTION! and requests that the user refer
to the user manual before using the instrument.
Risk of electric shock. The voltage at the parts marked with this
symbol may be dangerous.
Definition of Measurement Categories
Cat. IV: For measurements performed at the primary electrical supply
(<1000V) such as on primary overcurrent protection devices,
ripple control units, or meters.
Cat. III: For measurements performed in the building installation at the
distribution level such as on hardwired equipment in fixed
installation and circuit breakers.
Cat. II: For measurements performed on circuits directly connected to
the electrical distribution system. Examples are measurements
on household appliances or portable tools.
Micro-Ohmmeter Model 5600
Warning
- 3 -
Advertisement
Table of Contents
