Maintenance; Warning; Cleaning - AEMC 566 User Manual

5.1
• Remove the test leads from any input and sample
before opening the case.
• Remove the clamp from any circuit.
• Do not operate the clamp-on probe without a battery
case cover.
• To avoid electrical shock, do not attempt to perform
any servicing unless you are qualified to do so.
• To avoid electrical shock and/or damage to the instru-
ment, do not get water or other foreign agents into the
probe.
5.2

Cleaning

• To clean the probe, wipe the case with a damp cloth
and mild detergent.
• Do not use abrasives or solvents.
• Do not get water inside the case. This may lead to
electrical shock or damage to the instrument.
• Thoroughly dry all parts before using again.
18
CHAPTER 5

MAINTENANCE

Warning!

Clamp-on Meter Model 566