Recording With Time Indication - AEMC 725 User Manual

Recording With Time Indication

The clock function
time format indicator is displayed in the upper right corner in the fol-
lowing format: 00:00 (HH:MM). The clock is stopped by using the HOLD
key.
The relative time function indicates elapsed time of the Record mode as
well as the time of capture of each new MIN and MAX. The time clock is
accessed and initiated by pushing the Hz push button twice, provided the
clock is in the secondary display.
Time on the secondary display
MAX
For example, the time that has passed since RECORD mode has been
entered is 1 hour 52 minutes, with a minimum at the 8th minute and a
maximum at the 36th minute.
At any time during recording, sequence through the MIN/MAX push
button to display the capture time of MAX then MIN then AVG. Time
indications are the elapsed time of the captured event. The AVG value is
the total record time.
If the HOLD button is pushed to stop record time, MIN/MAX/AVG will
only display the total elapsed time of recording.
38
may be toggled ON/OFF with ON and Hz. The
MIN
FIXED POINTS
AVG
FLASHING
POINTS
Clamp-On Harmonic Probe Model