Setting In The Control Station - Mitsubishi Electric MELSEC iQ-R Series User Manual

Setting in the control station

Connect the engineering tool to the CPU module on the control station and set the parameters.
(1)
(1) Control station (station No.1)
(2) Normal station (station No.2)
(3) Normal station (station No.3)
1.
Set the CPU module as follows.
[Project]  [New]
2.
Click the [OK] button to add the module labels of the CPU module.
7 COMMUNICATION EXAMPLES
80
7.2 Communication Examples of CC-Link IE Controller Network
(2)
(3)