Mitsubishi Electric MELSEC iQ-R Series User Manual page 38

Function
Communication setting reflection
Sensor parameter read/write
Redundant system function
CPU module database access (from
external device) function
*1 This function cannot be used when "Q Compatible Ethernet" is selected for the network type.
*2 Availability depends on the network type and firmware version of the Ethernet-equipped module.
 MELSEC iQ-R Ethernet User's Manual (Application)
*3 Availability depends on the firmware version or models.
 MELSEC iQ-R Ethernet User's Manual (Application)
3 FUNCTION LIST
36
3.1 Function List of Ethernet
Description
Reflects the communication settings (such as IP addresses) in devices
supporting iQSS in "Device map area" which are connected over Ethernet.
For details, refer to the following.
 iQ Sensor Solution Reference Manual
Reads/writes parameters from/to iQSS-compatible devices.
For details, refer to the following.
 iQ Sensor Solution Reference Manual
*2
Allows the network to be configured in a redundant system
Operates a database, which is built in an SD memory card inserted into the
CPU module, from an application on a personal computer through the
Ethernet port of the CPU module.
For details, refer to the following.
MELSEC iQ-R CPU Module User's Manual (Application)
Availability
RJ71EN71, CPU module
RnENCPU (built-in
(network Ethernet
part) port part)
 
 
 
 