Setting in the local station
Connect the engineering tool to the CPU module on the local station and set the parameters. Set the station number 1 and 2
to the same setting.
(1)
(1) Master station (station No.0)
(2) Local station (station No.1)
(3) Local station (station No.2)
1.
Set the CPU module and add a module label of the CPU module. The setting method of the CPU module and addition
method of the module label are the same as those of the master station. ( Page 92 Setting in the master station)
2.
Set the master/local module as follows.
[Navigation window] [Parameter] [Module Information] Right-click [Add New Module]
3.
Add a module label of the master/local module. The addition method of the module label is the same as that of the
master station. ( Page 92 Setting in the master station)
4.
Set the items in "Required Settings" as follows. For station No.2, set "Station No." to "2".
[Navigation window] [Parameter] [Module Information] [RJ71GF11-T2] [Required Settings]
(2)
(3)
7 COMMUNICATION EXAMPLES
7.3 Communication Examples of CC-Link IE Field Network
7
95