Mitsubishi Electric MELSEC iQ-R Series User Manual page 98

5.
Set the refresh settings as follows. Set the station number 1 and 2 of the local station to the same refresh settings.
[Navigation window]  [Parameter]  [Module Information]  [RJ71GF11-T2]  [Basic Settings]  [Refresh Setting]
6.
Write the set parameters to the CPU module on the local station. Then reset the CPU module or power off and on the
system.
[Online]  [Write to PLC]
In this example, default values are used for parameters that are not shown above. For the parameters, refer to
the following.
 MELSEC iQ-R CC-Link IE Field Network User's Manual (Application)
7 COMMUNICATION EXAMPLES
96
7.3 Communication Examples of CC-Link IE Field Network