1
PART NAMES
1.1
RJ71EN71
This section describes the names of each part of the RJ71EN71.
(1)
(2)
(3)
(4)
(5)
No.
Name
(1)
Operation status indicator LED
(2)
Dot matrix LED
(3)
Ethernet port (P1)
L ER LED
LINK LED
(4)
Ethernet port (P2)
L ER LED
LINK LED
(5)
Production information marking
Description
Indicates the operating status of the module. ( Page 19 Network used and LED indication)
Indicates the station number set in the module and the module communication test result. ( Page 22 Dot
matrix LED indication)
For indication of the module communication test result, refer to the following.
MELSEC iQ-R Ethernet User's Manual (Application)
PORT1 connector for network. Connect an Ethernet cable.
For wiring methods and wiring precautions, refer to the following.
( Page 61 WIRING)
Indicates the port status. ( Page 19 Network used and LED indication)
Indicates the link status. ( Page 19 Network used and LED indication)
PORT2 connector for network. Connect an Ethernet cable.
For wiring methods and wiring precautions, refer to the following.
( Page 61 WIRING)
Same as the P1 connector
Shows the production information (16 digits) of the module.
1
1 PART NAMES
17
1.1 RJ71EN71