7.
Set the refresh settings as follows.
[Navigation window] [Parameter] [Module Information] [RJ71GP21-SX] [Basic Settings] [Refresh Setting]
8.
Write the set parameters to the CPU module on the control station. Then reset the CPU module or power off and on the
system.
[Online] [Write to PLC]
In this example, default values are used for parameters that are not shown above. For the parameters, refer to
the following.
MELSEC iQ-R CC-Link IE Controller Network User's Manual (Application)
7 COMMUNICATION EXAMPLES
82
7.2 Communication Examples of CC-Link IE Controller Network