Configuration menu
3 Choose Firmware upgrade. Enter y for Yes when asked if you want to upgrade the firmware.
If the firmware upgrade is successful, the Digi CM unit will reboot automatically. If a Firmware
upgrade failed! Warning appears, do not reboot the unit but repeat the upgrade process.
Restore factory defaults
You have two choices to restore the unit to its factory defaults. The options are restoring all factory
defaults or restoring all factory defaults except IP settings. To restore your unit to the factory
defaults, do the following:
1 Access the configuration menu.
2 Choose System administration.
3 Select Configuration import.
4 Select Location.
5 Select Factory Default.
The system will restore factory defaults, and the unit will automatically reboot.
Note
Use System Administration to save your configuration in case you need to reload it later or
onto another system. See
Digi CM User Guide
Add and configure a PC card
Restore factory defaults
for more information.
173