Table of Contents
Advertisement
Alerts and notifications
IP Address - Enter the IP address of the device receiving the trap alerts.
Community - The options are public or private.
Version - Choose the SNMP version, either version 1 or version 2c.
6 Click Save & apply.
Manage the SNMP protocol
The Digi CM unit 's SNMP protocol can be managed using an NMS or SNMP browser. However, before
the NMS or SNMP browser can access the data, the Access control settings must list the IP address of
the host from which the browser is executed. See the preceding graphic for details.
Configure port event handling
Once an SMTP or SNMP server has been configured, it can be used to send port-related alerts and
notifications. The following describes how to configure a port for port event handling.
1 Access the web interface.
2 Choose Serial port > Configuration.
3 Choose a port to configure and then Port logging.
4 Select Enable.
Digi CM User Guide
Manage the SNMP protocol
60
Hide quick links:
Advertisement
Table of Contents
