Normal Recording/Timer Recording; Normal Recording; Timer Recording - Sanyo DSR - 300 Instruction Manual

Digital video recorder
Table of Contents

Advertisement

3

NORMAL RECORDING/TIMER RECORDING

[REC/STOP] button
[TIMER] button

Normal recording

Follow the procedures below to record the monitored
image in the normal recording area.
1
Press the [REC/STOP] button.
The REC/STOP indicator lights. " " appears on the
screen (i.e., the recording symbol), and recording starts.
Recording
symbol
When you record for the first time, the default settings
are used. For details regarding changing of the image
quality or recording rate, see P. 59.
When the space remaining in the normal recording area
drops below the setting value, the FULL indicator lights
and recording stops. You can start recording from the
beginning again by changing the recording setting.
( P. 57)
You can record and play back images at the same time.
See P. 26 for the procedure.
You cannot change the menu during recording.
Ending normal recording
2
Press the [REC/STOP] button for at
least 2 seconds.
The REC/STOP indicator goes out and recording stops.
English
05- 10- 04
10: 50: 00 EN
10FPS

Timer recording

Follow the procedures below to record the monitored
image in the normal recording area at the set time.
1
Press the
[TIMER] button.
The TIMER indicator lights
and the digital video
recorder enters timer
recording standby mode.
A warning tone sounds if timer recording has not been
set.
(1) See P. 60 for how to set timer recording.
(2) When the time specified in the timer settings arrives,
the REC/STOP indicator lights, " " (the recording
symbol) appears in the screen, and recording starts.
(3) When the timer's end time arrives, the REC/STOP
indicator goes out, and recording stops.
When the space remaining in the normal recording area
drops below the setting value, the FULL indicator lights
and recording stops. You can start recording from the
beginning again by changing the recording setting.
( P. 57)
You can record and play back images at the same time.
See P. 26 for the procedure.
Stopping during timer recording
2
Press the [TIMER] button.
The TIMER indicator turns off and recording stops.
23
FULL indicator
TIMER indicator
05- 10- 04
10: 50: 00 EN
10FPS

Advertisement

Table of Contents
loading

Table of Contents