Table of Contents
Advertisement
5
NETWORK SET
(when optional interface board is installed)
6
Move the cursor to "GATEWAY" and
press the [ ] button, then press the
[
], [
], [ ], and [ ] buttons to
change the setting.
(Example: 0.0.0.0)
7
Move the cursor to "PORT" and press the
[ ] button, then press the [
and [ ] buttons to change the setting.
(Example: 00080)
When connecting the digital video recorder to a network,
check the following settings with the network administrator.
IP address
Subnet mask
Gateway
Port number
Password setting
Three access levels are setup for network connection, and
a password is set for each. Passwords can be between 4
and 8 alphanumeric characters.
"ID" or "PASSWORD (4-8)" at the top of the screen is
the screen title. You cannot move the cursor to this
item.
Example: Setting "AB123456" to "ID1"
1
Press the [
] or [
"ID1".
], [
], [ ],
] button to select
78
[Settings]
Setting
ID1
Allows images to be monitored via the network.
Allows images to be monitored and the playback or
ID2
search/playback of recorded images via the
network.
Allows all of this unit's operations and settings to be
ID3
performed.
2
Press the [ ] button.
The first password entry item "1" flashes.
Characters that can be entered in passwords: 0 to 9, A to Z
3
Press the [
], [
to input the password.
(1) Press the [
] or [
] button to select "A", then press
the [ ] button.
(2) The second entry item "1" flashes. Press the [
[
] button to select "B", then press the [ ] button.
(3) The third entry item "1" flashes. Use the above
procedure to select "AB123456".
4
When you have finished making the
setting, press the [ ] button.
5
Where necessary, use the same
procedure to set the "ID2" and "ID3"
passwords.
6
Press the [EXIT/OSD] button.
The display returns to the normal screen.
Description
], [ ], and [ ] buttons
] or
English
Advertisement
Table of Contents
