Table of Contents
Advertisement
. ' # ) A 9 # 8 # 5 9 ) $ D Q Q M T V R ' ' ' ' ' ' ' '
RECORDING IMAGES
Images that are being monitored can be recorded onto the hard disk inside the DVR. There are three
recording modes that are available: "Normal recording" involves using manual operations to record live
images that are being monitored; "Timer recording" lets you specify a time for recording to take place
automatically; and "Alarm recording" automatically starts recording when an alarm such as an intruder
is detected.
Images are recorded for DVRs as a single unit, and specifying individual channels for recording is
not possible. If all four channels of a DSR-M804/M814 are connected, the images from all four
cameras will be recorded at the same time.
Normal Recording (User Level: ID3 or higher)
You can specify a DVR and then click the recording button to immediately start recording the live
images that are currently being monitored.
Normal recording from the quad/single screen
The following operations describe how to carry out normal recording from the quad/single screen.
1
1
Click
(
) on the toolbar.
The quad/single screen will be displayed.
2
Double-click a DVR in the "TARGET"
2 2
2 ).
window (2
Live images from the selected DVR will be
displayed in the window. The title bar will
change to blue and image mode (LIVE) will
be displayed.
3
Click
(3
3 3
3 ) on the recording control
panel.
The REC indicator on the DVR will
illuminate and recording of the live images
will start.
A b symbol will appear in the title bar while
recording is in progress.
4
To stop recording, click
recording control panel.
The REC indicator on the DVR will switch
off and recording will stop.
•
If you would like to avoid recording being stopped by mistake while it is in progress, click
5 ). The recording control panel buttons will be grayed out and locked. Click the button once
(5
5 5
more to cancel the lock.
•
The color of the title bar will change to red (green letters) while the DVR is carrying out alarm
recording during live monitoring.
Normal recording from the individual camera/sequence screen
The basic operations are the same as for the quad/single screen. Carry out steps 2 to 4 for quad/single
screen operation when the respective screens are displayed.
5
4 ) on the
(4
4 4
4 3
64
' ' '
1
2
English
Advertisement
Table of Contents
