Sanyo DSR - 300 Instruction Manual page 111

2 MENU-SPECIFIC SETTINGS
(when optional interface board is installed)
13. NETWORK SET
Network settings must be made in advance on the unit
whenever it is to be controlled via a network. Once this has
been done, settings can then be changed from the
controlling PC.
Changing network-related settings
When these settings are modified, connection will be
canceled and control rights will be returned to the unit.
To restore the connection, repeat network settings on
the PC to match the modified unit settings.
(1)
(2)
(3)
(4)
(5)
(6)
2
1
Change the settings as required.
Item
Allows the unit's IP address to be
(1) IP ADDRESS
modified.
Allows the unit's subnet mask to be
(2) SUBNET MASK
modified.
(3) GATEWAY Allows the unit's gateway to be modified.
Allows the unit's port number to be
(4) PORT modified. Set within the range of 1 to
65535. (default setting: 80)
If a value other than "80" is set as the default value for
the port, when specifying the URL, enter a colon (:) and
then the port number after the IP address.
For example, if the port number was set as "81", you
should enter
http://192.168.0.1:81/
Description
110
(5) PASSWORD SETTING
This item allows you to set a password for each different
user level.
User level
User name
Monitoring of live images
Monitoring and searching
of recorded images
Usable
menus Starting and stopping of
recording; timer recording;
modification of unit
settings, etc.
Password (default setting)
Use between 4 and 8 alphanumeric characters for
passwords.
(6) NETWORK SPEED
This item lets you modify the network speed setting.
NO LIMIT, 64, 128, 256, 512, or 1024 kbps
When the unit is reset, the network speed setting will revert
to the default value (i.e., NO LIMIT).
2
Click [SAVE].
The network settings or modifications are saved.
1 2 3
ID1 ID2 ID3
1111 2222 3333
English