Menu Setting Procedures
5. RECORDING CONDITIONS SET
This sets overwrite conditions and remaining disk capacity warning criteria for each
recording area.
NORMAL RECORDING AREA OVERWRITE
This specifies whether to stop recording or to
continue recording by overwriting images that
are currently recorded on the hard disk when
the normal recording area has become full.
1
Select [ON/OFF] from the pull-down menu
on the screen.
• ON:
When the normal recording area becomes full,
images will begin to be overwritten automatically
from the start of the normal recording area.
• OFF:
Recording will stop when the normal recording
area becomes full.
ALARM RECORDING AREA OVERWRITE
This specifies whether to stop recording or to
continue recording by overwriting images that
are currently recorded on the hard disk when
the alarm recording area has become full.
1
Select [ON/OFF] from the pull-down menu
on the screen
• ON:
When the alarm recording area becomes full,
images will begin to be overwritten automatically
from the start of the alarm recording area.
• OFF:
Recording will stop when the alarm recording
area becomes full.
REMAINING DISK WARNING
The buzzer can be set to sound a warning if the
NORMAL RECORDING AREA OVERWRITE and
ALARM RECORDING AREA OVERWRITE
settings are OFF and the remaining disk
capacity becomes low (see p25). The remaining
disk value at which a warning will be given can
be specified here.
1
Set a numerical value on the pull-down
menu on the screen.
Setting range: 1% to 10% (1% units)
If OVERWRITE setting is ON, "**" is displayed and
REMAINING DISK WARNING cannot be set.
Click [SAVE] to complete the submenu settings (or changes).
English
(default setting: ON)
(default setting: ON)
13