Sanyo DSR - 300 Instruction Manual page 107

2 MENU-SPECIFIC SETTINGS
(when optional interface board is installed)
Setting audio recording
Audio can be recorded together with images when
performing alarm recording. Note, however, that since this
audio data will also be stored in the alarm recording area,
the recording time for this area will be reduced.
3
Select "AUDIO RECORDING".
[Settings] ( indicates default setting.)
Setting
ON Audio will be recorded.
OFF Audio will not be recorded.
Audio recording can only be specified when the
recording rate is more than A 5.00/10.00 FPS.
Description
106
Setting alarm recording
In order to carry out alarm recording, it will be necessary to
set operation patterns and recording conditions.
4
5
4
Select a mode using "ALARM
RECORDING".
[Settings] ( indicates default setting.)
Setting
OFF Does not perform alarm recording.
Alarm recording is always performed,
ENABLED
regardless of timer recording or timer settings.
AL-REC ON Alarm recording is performed only during timer
TIMER recording.
AL-REC OFF Alarm recording is performed only during
TIMER recording other than timer recording.
Alarm recording is performed only in the
OLY AL-RC
period set for timer recording without timer
ON TMR
recording actually being performed.
5
Select "REC RATE".
A 30.00/60.00, A 15.00/30.00, A 10.00/20.00, A 7.50/15.00,
A 5.00/10.00, 3.75/7.50, 3.00/6.00, 2.50/5.00, 2.14/4.29,
1.88/3.75, 1.67/3.33, 1.50/3.00, 1.36/2.73, 1.15/2.31,
1.00/2.00, 0.83/1.67, 0.71/1.43, 0.63/1.25, 0.56/1.11,
0.50/1.00, 0.25/0.50, 0.17/0.33, 0.13/0.25, 0.10/0.20,
0.05/0.10, 0.03/0.05, 0.02/0.03 (Unit: FPS)
6
Set the duration for alarm recording
using "DURATION".
1 SEC, 2 SEC, 5 SEC, 10 SEC, 20 SEC, 40 SEC, 1 MIN,
2 MIN, 3 MIN, 4 MIN, 5 MIN, 10 MIN, 15 MIN, *CC
(Default setting: 1 SEC)
*CC: Operates while an alarm is being activated.
6
Description
English