Table of Contents
Advertisement
4
RECORDING CONDITIONS SET
<MAIN MENU 1>
Setting series recording
This section describes how to perform series recording
when a number of units have been connected together.
When series recording is being carried out, the overwrite
setting for the normal recording area and alarm recording
area must be set to "OFF" as described on P. 57.
When series recording is set, recording continues on a
second digital video recorder when the remaining space
in the first recorder's normal or alarm recording area
runs out. Recording in areas with remaining space also
stops. If the second digital video recorder is set to
perform timer recording, recording continues according
to that setting.
1
Connect the digital video recorders
using the correct cables. ( P. 17)
Cables of no longer than 3 m in length should be used.
2
Press the [MENU] button.
The <MAIN MENU 1> screen appears.
3
Select "4. RECORDING CONDITIONS
SET" and press the [ ] button.
The <RECORDING CONDITIONS SET> screen appears.
The cursor moves to "SERIES RECORDING".
[MENU] button
[
] button
[Settings] (
indicates default setting.)
Setting
OFF
No series recording.
When multiple digital video recorders are
connected, sets recording to continue automatically
ON
on the second and subsequent hard disks when the
first hard disk becomes full.
4
Press the [ ] button to select "OFF",
then press the [
select "ON", and press the [ ] button.
The cursor moves to "OVERWRITE" for the normal
recording area.
The second DVR can perform recording even when
TIMER STANDBY mode has been activated.
56
[
] button
[
] button
[EXIT/OSD] button
Description
] or [
] button to
English
Advertisement
Table of Contents
