Table of Contents
Advertisement
5
SAVING RECORDED IMAGES
(when optional interface board is installed)
You can use the procedures described below to copy
recorded images to the hard disk's archive area or to
download images to a PC or the like.
These functions should be used to backup important
images from the normal recording area and the alarm
recording area.
Copied data is stored one image at a time. Moving
images can be copied by setting the number of images
required from the first copied image.
In a single copy operation, a maximum of 10,000
images can be copied to the archive area and a
maximum of 1,000 images can be downloaded to a PC.
In certain cases where network-busy is detected as a
result of hardware conditions, the network may be
forcibly disconnected in order to protect DVR recording
operations. Furthermore, the network will be forcibly
disconnected in response to a command to send a
large amount of data in a single operation (in particular,
when 100 images or more are to be saved), and in such
a case, a limit should be applied to the number of
images based on the hardware configuration in
question.
When the archive area becomes full of images, these
images are to be downloaded to a CompactFlash card
or the like, and [AREA FULL RESET] from the
recording area settings on the MAIN MENU should be
clicked. ( P. 101)
Copying to the archive area
(1)
(3)
(4)
(1) Recording date/time: The recording date and time for
the image currently being played back
(2) PLAYBACK AREA:
The area in which the image currently being played
back is recorded
(3) HOW MANY: Setting for the number of images to be
stored
(4) Message box: Displays the state of progress for
copying
(5) [START]: Starts copying
1
2
Playback of the image is paused.
3
The COPY screen is displayed.
4
Specifically, indicate the number of images after the start
image to be copied in succession.
Setting range: 1 to 10,000
A warning message will be displayed if an invalid number
is entered here.
(2)
5
Copying to the archive area will begin and the message
box will display the current state of progress.
[Settings]
Copying
Copying completed
(5)
122
NORMAL
ALARM
Play an image from the normal
recording area or the alarm recording
area.
Click the
button at the start of the
image to be copied.
Click the
button on the operation
panel.
Input the number of images into "HOW
MANY".
Click [START].
Setting
"COPYING TO ARCHIVE AREA!"
"COPY FINISHED!"
Description
English
Advertisement
Table of Contents
