Recording Area Set - Sanyo DSR - 300 Instruction Manual

2 MENU-SPECIFIC SETTINGS
(when optional interface board is installed)

4. RECORDING AREA SET

The unit's hard disk is separated into three independent recording areas. Furthermore, five different recording modes can be
used for these three areas.
The memory capacity for each area is allocated as a percentage. (Setting units: 1%)
Recording area
Normal
recording
Normal
recording area
Timer recording
Alarm recording
Alarm recording
area
Pre-alarm
recording
Archive area Copy
(1) Total capacity display
This section displays the total capacity of the hard disk.
(2) Area-specific capacity display
This section displays the capacity set by the unit for each
recording area as a percentage of the total capacity.
Setting and modification of recording area capacities
cannot be carried out from a PC.
(3) Recording area reset
When the overwrite setting is "OFF", recording will be
automatically stopped when the corresponding recording
area has been filled with image data. In such a case,
[AREA FULL RESET] can be clicked to clear all recorded
data and to restart recording from the beginning of each
area.
The ability to perform a reset will not be required in the
following cases, and for this reason, [AREA FULL RESET]
is not displayed.
When the overwrite setting is "ON".
English
Recording mode
Recording is performed in response to manual operation of the operation panel's
Manual
button.
Recording is performed automatically over the time range set using "7. TIMER SET" from
Automatic
the MAIN MENU.
Recording is performed automatically upon occurrence of an alarm set using "9. ALARM
Automatic
REC MODE SET" from the MAIN MENU.
Automatic recording of images before an alarm is performed automatically in
Automatic accordance with "PRE-ALARM RECORDING" from the MAIN MENU's "9. ALARM REC
MODE SET". This is used as a complementary function for alarm recording.
The required images are copied from another recording area and stored in response to
Manual
manual operation of the operation panel's
Recording method
button.
(1)
(2)
101
(3)