Buzzer Set - Sanyo DSR - 300 Instruction Manual

2 MENU-SPECIFIC SETTINGS
(when optional interface board is installed)
11. RS-232C/RS-485 SET
This screen displays settings relevant to the unit's
interfaces.
It will not be possible to modify settings: The screen
displays data for confirmation purposes only.
Item
Displays the type if interface being
(1) CONTROL
used for control of the unit.
Displays the RS-232C or RS-485
(2) DATA SPEED
communication speed.
Displays whether or not status
(3) STATUS INFO information will be transmitted
during RS-485 communication.
Displays whether or not alarm
(4) ALARM INFO information will be transmitted
during RS-485 communication.
Displays the address when RS-485
(5) ADDRESS
has been selected.

12. BUZZER SET

Set a warning buzzer to sound for alarms or when the hard
disk space reaches zero as described below.
1
Select "ON" or "OFF" for the alarm
buzzer.
To sound a buzzer on the PC
Create a folder named BUZZER in the PC's root
directory, and save the sound file to use as the buzzer
tone as C:\BUZZER\BUZZER.WAV.
When a PC-monitored DVR generates an alarm, the PC
also sounds a buzzer, using the saved sound file.
Item
(1) ALARM
(2) DISK FULL
(3) DISK ERROR
LOCK
(4)
WARNING
(5) KEY IN
(6) NON REC
2
Click [SAVE].
The new settings are saved.
English
Overview
Default setting
OFF Sounds a buzzer when an alarm is detected.
Sounds a buzzer when the amount of data stored in each of the hard disk's recording areas has
ON
reached the remaining-space warning level. ( P. 102)
ON Sounds a buzzer when a hard-disk error occurs.
Sounds a buzzer when an operation button not permitted for the current user level is pressed while
ON the security lock is set. Specifically, the buzzer sounds twice with an interval of approximately 0.5
seconds.
OFF The buzzer emits a key-operation sound each time a button is pressed.
OFF Sounds a buzzer when recording is stopped.
(1)
(2)
(3)
(4)
(5)
Setting
RS-232C When RS-232C is being used.
RS-485 When RS-485 is being used.
2400/4800/9600/
19200 (bps)
ON Status information will be transmitted.
OFF Status information will not be transmitted.
ON Alarm information will be transmitted.
OFF Alarm information will not be transmitted.
0 to 127 Set within the range of 0 to 127.
(1)
(2)
(3)
(4)
(5)
(6)
2
Description
109
Description