Recording Area Set - Sanyo DSR-3009 Manual

4. RECORDING AREA SET

The hard disk in this unit consists of three independent recording areas, each of which has five recording
modes.
A percentage of the total recording capacity is allocated to each recording area (settings are in units of
1%).
Recording area
NORMAL RECORDING
AREA
ALARM RECORDING AREA
ARCHIVE AREA
1
Total capacity display
Displays the total capacity of the hard disk.
If two hard disks have been installed and the digital
video recorder's HDD SET function has been used
to set mirroring to " ON" , the details for the disk with
the smaller capacity will be displayed.
2
Capacity display for each recording area
The recording capacity of each recording area of the digital
video recorder's hard drive is displayed as a percentage of
the total capacity.
The capacities of the recording areas cannot be set
and changed from a connected computer.
3
Recording area reset
If the OVERWRITE setting is "OFF", recording will stop
automatically when a recording area becomes full. If when
[AREA FULL RESET] has been selected, the recordings that
have been made will be deleted and recording will begin
again from the start of the recording area.
If the recording capacity for the normal recording
area and the alarm recording area have been set to
0% and if the OVERWRITE setting is " OFF" , there is
no need to use the reset function, and so the AREA
FULL RESET button will not appear on the screen at
such times.
Recording mode
Normal recording Manual
Timer recording Automatic
Alarm recording Automatic
Pre-alarm Automatic
recording
Copy Manual
10
Menu Setting Procedures
Notes
Recording is carried out manually using the
O button.
Recording is carried out automatically within
the time range specified by the timer
recording setting made using the menu
screen.
Recording is carried out automatically when
an alarm is detected according to the alarm
recording settings made using the menu
screen.
Images that are around the time that the
alarm was detected are recorded
automatically according to the pre-alarm
recording settings made using the menu
screen.
This is used as a complementary function to
alarm recording.
Copies and saves essential recordings from
another recording area by using the
button on the operating panel manually.
1
2
3
M
English