Auerswald COMfortel 1400 IP Setup Manual page 36

Warning: Power surges, which may occur during electrical storms, can
cause life-threatening electric shocks, or damage/destroy the device.
Warning: When using Power-over-Ethernet (PoE) electrical circuits, there
is a risk of electric shock if you create connections with uninsulated,
exposed metal contacts, conductors, or terminal clamps.
Warning: Non-approved headsets, external speakers, or receivers may
cause hearing damage or interfere with the voice connection.
Warning: The telephone receiver creates a weak magnetic field, which
may attract small magnetic objects, such as needles and paper clips.
Warning: The device contains small parts which can be swallowed by
small children.
Caution: Improper cleaning or operation can damage or destroy the dis-
play.
36
Do not touch the contact points with pointed, metallic or damp objects.
Do not carry the device by the connection cables.
Use the cable channels at the bottom of the telephone to reduce strain.
Avoid disconnecting and connecting lines during an electrical storm.
Hire a qualified electrician to lay the cables within the building.
Protect the devices by installing overvoltage protection.
Avoid creating connections of this kind unless the exposed metal con-
tacts are installed in areas with restricted access. A restricted access
area can be only be accessed by using a special tool, lock and key or
other means of security. In addition, persons who have been granted
access to these areas will have been explicitly informed of these haz-
ards.
Only use this telephone with approved accessories with the CE mark.
To avoid injuries, do not put down the receiver close to such objects.
Keep the device out of reach of children.
Keep the display clean. To do this, use a soft, dry cloth.
To operate the telephone, use your fingers, fingernails or a special
touch pen. Under no circumstance use ballpoint pens, pencils, or other
pointed objects on the display.
Never apply force or excessive pressure when touching the display.
COMfortel 1400 IP - Firmware V2.4 - Setup V05 12/2015