This chapter describes the preparations required before commissioning the device. This
includes adjusting the height and the connection of the receiver and a headset (not included
in the package). Furthermore, this includes the installation of the telephone at a suitable loca-
tion or the wall-mounting.
Connections at the Bottom Side of the Telephone
Fig. 7: Sockets
A
Receiver socket
B
Headset socket
C
MicroSD/SDHC card slot
D
Network cable socket (PoE)
E
PC socket
Preparing the Telephone for Use as Table Device
Requirements
–
Case feet delivered with the telephone
Assemble the case feet in the required position (see
1.
Note: The feet can be assembled in three different positions.
Push the feet inwards as far as they will go.
2.
COMfortel 1400 IP - Firmware V2.4 - Setup V05 12/2015
Preparation
Fig. 8 on page
44).
43