Service - Color - Barco F80 Series User Manual

GUI – System Settings
Image 9-9
2. Enter the service code.
3. In the Service menu, select Color Wheel.
Image 9-10
The Color Wheel menu will be displayed.
Image 9-11
4. Change the values to the desired position.
9.4.2 Service – Color
CAUTION: The native colors have been measured and set during factory production. Do not
change them, unless parts of the optical path have been replaced due to servicing.
If you need to change the native colors on the device, make sure to also perform a P7 calibration,
using the Projector Toolset and a chroma meter. For more info on P7 calibration, refer to the
Projector Toolset Reference guide.
How to adjust the P7 native settings
1. In the main menu, System Settings → Service.
Image 9-12
2. Enter the service code.
3. In the Service menu, select Color.
88 R5906852-01 F80 series