Barco F80 Series User Manual page 14

Safety
cleaners, since these will damage the cabinet. Stubborn stains may be removed with a cloth lightly
dampened with mild detergent solution.
•
To ensure the highest optical performance and resolution, the projection lenses are specially treated with
an anti-reflective coating, therefore, avoid touching the lens. To remove dust on the lens, use a soft dry
cloth. For lens cleaning follow the instructions precisely as stipulated in the projector manual.
•
Only connect the projector to signal sources and voltages as described in the technical specification.
Connecting to unspecified signal sources or voltages may lead to malfunction and permanent damage of
the unit.
•
Allowed ambient temperature range: t
•
Rated humidity = 20% RH to 80% RH Non-condensed.
•
Do not operate the projector outside its temperature and humidity specifications as this may result in
overheating and malfunction.
On servicing
•
Do not attempt to service this product yourself. This product contains no user serviceable parts except
parts describe in the User manual. Attempts to modify/replace mechanics or electronics inside the
housing or compartments will violate any warranties and may expose you to dangerous voltage potentials,
risk of electric shock and retinal eye injury.
•
Refer all servicing to Barco authorized repair centers.
•
Attempts to alter the factory-set internal controls or to change other control settings not specially
discussed in this manual can lead to permanent damage to the projector and cancellation of the warranty.
•
Remove all power from the projector and refer servicing to Barco authorized repair center under the
following conditions:
- When the power cord or plug is damaged or frayed.
- If liquid has been spilled into the equipment.
- If the product has been exposed to rain or water.
- If the product does not operate normally when the operating instructions are followed. Adjust only
those controls that are covered by the operating instructions since improper adjustment of the other
controls may result in damage and will often require extensive work by a qualified technician to restore
the product to normal operation.
- If the product has been dropped or the cabinet has been damaged.
- If the product exhibits a distinct change in performance, indicating a need for service.
•
Replacement parts: When replacement parts are required, be sure the service technician has used
original Barco replacement parts or authorized replacement parts which have the same characteristics as
the Barco original part. Unauthorized substitutions may result in degraded performance and reliability, fire,
electric shock or other hazards. Unauthorized substitutions may void warranty.
•
Safety check: Upon completion of any service or repairs to this projector, ask the service technician to
perform safety checks to determine that the product is in proper operating condition.
Safety Data Sheets for Hazardous Chemicals
For safe handling information on chemical products, consult the Safety Data Sheet (SDS). SDSs are available
upon request via safetydatasheets@barco.com.
14 R5906852-01 F80 series
= 10°C (50°F) to 40°C (104°F)
a