GUI – System Settings
Image 9-23
The Pixel Shift menu will be displayed.
Image 9-24
4.
Change the values to the desired position.
•
Gain: is the amplitude of the waveform which is sent into the Wobulator. Default value: 0.65
•
Resonance (frequency) : if frequency is 0Hz the wobulator is of. High frequency means high noise. Default
value: 227Hz
9.5 Reset
What can be done?
All settings and values on the projector can be reset to its default values. This can be done for one or more
settings separately, or all settings together (factory reset).
Default settings
The following settings are default settings:
UserInterface
Network
System
Screen
Optics
Illumination
ImageConnector
ImageResolution
ImageWarp
92
R5906852-01
F80 series
Setting
Theme
Communication
Eco Mode (if applicable)
Ready Timeout
Screen luminance - Unit
High Contrast
Power
Color Space
Signal Range
Output Resolution (if applicable)
Screen size
4 corner
Bow
Warp files
Default value
Light
LAN, Automatic settings
Available
auto
nits
Off
100%
auto
auto
4K UHD
5120x3200 / 2560x1600
Warp off, no warp
Disabled, no files selected