Image 9-17: Service code
If you have a service code, select Service code with the arrow keys and click OK to enter the entry mode.
Enter the code with the numeric keys and select OK and click OK on to confirm. Otherwise select DISCARD
and click OK to return to the System Settings menu.
Overview
•
Service – Color
•
Service – Statistics
•
Lens Calibration
•
Flex brightness
9.6.1 Service – Color
CAUTION: The native colors have been measured and set during factory production. Do not
change them, unless parts of the optical path have been replaced due to servicing.
If you need to change the native colors on the device, make sure to also perform a P7 calibration,
using the Projector Toolset and a chroma meter. For more info on P7 calibration, refer to the
Projector Toolset Reference guide.
How to adjust the P7 native settings
1.
In the main menu, System Settings → Service.
Image 9-18
2.
Enter the service code.
3.
In the Service menu, select Color.
Image 9-19
GUI – System Settings
R5906112-06
UDX series
107