Service - Color; Service - Statistics - Barco UDX 4K32 User Manual

9.5.1 Service – Color
C
AUTION
unless parts of the optical path have been replaced due to servicing.
If you need to change the native colors on the device, make sure to also perform a P7 calibration, using the
Projector Toolset and a chroma meter. For more info on P7 calibration, refer to the Projector Toolset Reference
guide.
How to adjust the P7 native settings
1. In the main menu, System Settings → Service.
Image 9-15
2. Enter the service code.
3. In the Service menu, select Color.
Image 9-16
The Color menu will be displayed.
Image 9-17
4. Select the desired value to change and confirm.
5. Change the values to the desired position, taking into account the color gamut values.
6. Select APPLY and click OK.
9.5.2 Service – Statistics
What can be seen?
The statistics screen shows the general information about the projector.
The following items will be displayed:
• Laser runtime
• Laser Strikes
• Projector Runtime
• System time
• Current Uptime
R5906112 UDX SERIES 24/05/2017
:
The native colors have been measured and set during factory production. Do not change them,
9. GUI – System Settings
59