Led And Button Indication Chart - Barco F80 Series User Manual

Power
Standard

3.6 LED and Button indication chart

Button Backlight Status
Button
Standby button
Shutter button
LED Status
The LED status is located on the top side of the projector, near the IR receiver.
During normal operation the LED is unlit. In the event of a critical error or high temperature, the LED will
display red.
By critical error, the projector cannot be restarted until the projector is disconnected from the power supply
and then reconnected again. If the reason for the error persist, the projector will again go to critical error
status.
By high temperature, the projector will restart when it has cooled down, and temperatures are back within the
normal operating limitations.
Power 5V, max 1,5A (out)
USB 2.0
Color status
Blinking WHITE (slow)
Blinking WHITE (fast)
Solid WHITE
Blinking BLUE
Solid BLUE
Blinking RED
Off (no color)
Solid WHITE
Solid RED
Input & Communication
Description
Projector starts up (booting)
Firmware upgrade
Projector is in Standby mode
Projector goes to ON mode
Projector is ON
Error condition
Projector is OFF, starts up, or is in
Standby mode.
Projector is ON, shutter is open
Projector is ON, shutter is closed
R5906852-01 F80 series 31