Safety Standards Compliance; Emc, Emi, And Esd Compliance; Equipment Safety Standard Compliance; Figure 1 Pse Certification - Nokia 7368 ISAM ONT G-240W-C Product Manual

Hide thumbs Also See for 7368 ISAM ONT G-240W-C:
Table of Contents

Advertisement

7368 ISAM ONT G-240W-C Product Guide
Figure 1
PSE certification
This is a Class B product based on the standard of the Voluntary Control Council for Interference
from Information Technology Equipment (VCCI). If this is used near a radio or television receiver in
a domestic environment, it may cause radio interference. Install and use the equipment according
to the instruction manual.
Warning

2.2 Safety standards compliance

This section describes the ONT compliance with the European safety standards.
2.2.1
The ONT equipment complies with the following EMC, EMI, and ESD requirements:
2.2.2
The ONT equipment complies with the requirements of EN 60950-1, Safety of
Information Technology Equipment for use in a restricted location (per R-269).
Issue: 01
R05.05.01 | December 2016 | 3FE 46690 AAAA TCZZA | Edition 01

EMC, EMI, and ESD compliance

EN 300-328 v1.9.1 wide band data transmission standards for 2.4GHz bands
EN 300-386 V1.5.1: Electromagnetic Compatibility and Radio Spectrum Matters
(ERM): Telecommunications Network Equipment; Electromagnetic Compatibility
(EMC) requirements; Electrostatic Discharge (ESD) requirements
EN 55022 (2006): Class B, Information Technology Equipment, Radio
Disturbance Characteristics, limits and methods of measurement
EN 55024 (2010): Information Technology Equipment, Immunity Characteristics,
limits and methods of measurement
European Council Directive 2004/108/EC
EN 300-386 V1.4.1: 2008
EN 55022:2006 Class B (ONTs)

Equipment safety standard compliance

Edition 01
ETSI ONT safety guidelines
19841
19

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents