Configuring The G-240W-C To Function As A Single Port Ont; Support - Nokia 7368 ISAM ONT G-240W-C Product Manual

G-240W-C unit data sheet
•
•
•
•
•
•
•
•
•
•
4.2.1
In addition to functioning as a residential gateway, the G-240W-C ONT can be
configured to function as a single port ONT.
In the custom configuration, the ONT reports to the OLT as one PPTP port. The
physical Ethernet port of the ONT is managed by the RGW using the TR-069
protocol, rather than by the ONT/OMCI.
To enable the ONT to function as a single port ONT, the value of the parameter:
InternetGatewayDevice.DeviceInfo.X_ALU-COM_PortReport2OLT.PPTP
must be set to
PPTP_one
A custom pre-configuration file is required to operate the G-240W-C as a single-port
ONT. Contact your Nokia support engineer to arrange for a custom pre-configuration
file.
4.2.2
The ONT supports the reading of optical parameters via TR-069:
•
•
•
•
•
These are the same optical parameters supported in the GUI. For more information,
see Table
36
R05.05.01 | December 2016 | 3FE 46690 AAAA TCZZA | Edition 01
ALG and UPnP port forwarding
DMZ
IP/MAC filter
Multi-level firewall
DNS server
DHCP client/server
support HT20/HT40 for 802.11b/g/n, and HT20/40/80 for 802.11AC
support for up to 32 simultaneous wireless connections
External USB HD (Hard Drive) support, accessible to all LAN devices
support for AIS with DOWN MEP
Configuring the G-240W-C to function as a single
port ONT
TR-069 support
laser bias current
voltage
temperature
received signal levels
lower thresholds
21 in the chapter
7368 ISAM ONT G-240W-C Product Guide
"Configure a G-240W-C indoor
Edition 01
ONT".
Issue: 01