Safety Standards Compliance; Electrical Safety Guidelines - Nokia 7368 Intelligent Services Access Manager ONT Product Manual

ETSI ONT safety guidelines

Safety standards compliance

1.2 Safety standards compliance
This section describes the ONT compliance with the European safety standards.
1.2.1 EMC, EMI, and ESD compliance
The ONT equipment complies with the following EMC, EMI, and ESD requirements:
• EN 300-328 v1.9.1 wide band data transmission standards for 2.4GHz bands
• EN 300-386 V1.5.1: Electromagnetic Compatibility and Radio Spectrum Matters (ERM):
Telecommunications Network Equipment; Electromagnetic Compatibility (EMC) requirements;
Electrostatic Discharge (ESD) requirements
• EN 55022 (2006): Class B, Information Technology Equipment, Radio Disturbance
Characteristics, limits and methods of measurement
• EN 55024 (2010): Information Technology Equipment, Immunity Characteristics, limits and
methods of measurement
• European Council Directive 2004/108/EC
• EN 300-386 V1.4.1: 2008
• EN 55022:2006 Class B (ONTs)
1.2.2 Equipment safety standard compliance
The ONT equipment complies with the requirements of EN 60950-1, Safety of Information
Technology Equipment for use in a restricted location (per R-269).
1.2.3 Environmental standard compliance
The ONT equipment complies with the EN 300 019 European environmental standards.
1.2.4 Laser product standard compliance
For most ONTs, the ONT equipment complies with EN 60825-1 and IEC 60825-2 for laser products.
If there is an exception to this compliance regulation, you can find this information in the standards
compliance section of the unit data sheet in this Product Guide.
1.2.5 Resistibility requirements compliance
The ONT equipment complies with the requirements of ITU Recommendation K.21 for resistibility of
telecommunication equipment installed in customer premises to over voltage and over currents.
1.2.6 Acoustic noise emission standard compliance
The ONT equipment complies with EN 300 753 acoustic noise emission limit and test methods.
1.3

Electrical safety guidelines

This section provides the electrical safety guidelines for the ONT equipment.
Note: The ONTs comply with the U.S. National Electrical Code. However, local electrical
authorities have jurisdiction when there are differences between the local and U.S. standards.
August 2020
Issue 4
Nokia – Proprietary and Confidential
Use pursuant to applicable agreements
3FE-48293-ACAA-TCZZA
7368 ISAM ONT
19