Procedure - Nokia 7368 ISAM ONT G-240W-C Product Manual

7368 ISAM ONT G-240W-C Product Guide

5.6 Procedure

Use this procedure to install a G-240W-C indoor ONT.
1
2
Issue: 01
R05.05.01 | December 2016 | 3FE 46690 AAAA TCZZA | Edition 01
Place the indoor ONT unit:
a On the flat surface, such as a desk; go to step 3.
Note — The G-240W-C cannot be stacked with another ONT or with
other equipment. The ONT mounting requirements are:
•
allow a minimum 100 mm clearance above the top cover
•
allow a minimum 50 mm clearance from the side vents
•
do not place any heat source directly above the top cover or below the
bottom cover
b On a wall, go to step 2.
Mount the G-240W-C indoor ONT on a wall.
The G-240W-C indoor ONT must be mounted in a horizontal position, as indicated by the wall
mounting key holes in in Figure 15.
If possible, mount the ONT on a wall stud.
Figure 15 shows the ONT with the connections and the key mounting holes.
Edition 01
Install a G-240W-C indoor ONT
57