G-240W-C Ont Considerations And Limitations; Table 15 G-240W-C Ont Considerations And Limitations - Nokia 7368 ISAM ONT G-240W-C Product Manual

G-240W-C unit data sheet
4.11.2
Table
Table 15
54
R05.05.01 | December 2016 | 3FE 46690 AAAA TCZZA | Edition 01

G-240W-C ONT considerations and limitations

15 lists the considerations and limitations for Package P G-240W-C ONTs.
G-240W-C ONT considerations and limitations
Considerations and limitations
Call History Data collection (ONTCALLHST) is supported, except for the following parameters:
RTP packets (discarded), far-end RTCP and RTCP-XR participation, RTCP average and peak round trip delay,
MOS, average jitter, number of jitter-buffer over-runs and under runs.
Some voice features are configurable on a per ONT basis, including Call Waiting, Call Hold, 3-Way Calling, and
Call Transfer.
The following voice features / GSIP parameters are configurable on a per-Client/ per-ONT basis (not
per-Subscriber):
•
Enable Caller ID and Enable Caller Name ID
•
Digitmap and the associated Interdigit and Critical timers and Enter key parameters
•
Warmline timer is enabled per subscriber, but the warmline timer value is configured per ONT and must
have a lower value than the Permanent time
•
Miscellaneous timers: Permanent, Timed-release, Reanswer, Error-tone, and CW-alert timers
•
Features / functions: Message waiting mode, WMWI refresh interval, DTMF volume level
•
Service Codes for the following features: CCW, Call Hold and Warmline
7368 ISAM ONT G-240W-C Product Guide
Edition 01 Issue: 01