Figure 22 Wan Status Window; Table 18 Wan Status Parameters - Nokia 7368 ISAM ONT G-240W-C Product Manual

Configure a G-240W-C indoor ONT
Procedure 9
1
Figure 22
Table 18
(1 of 2)
72
R05.05.01 | December 2016 | 3FE 46690 AAAA TCZZA | Edition 01
WAN status retrieval
Select Status > WAN Status from the top-level menu in the GPON Home Gateway window,
as shown in Figure 22.
WAN status window
Table 18 describes the fields in the WAN status window.
WAN status parameters
Field
WAN connection list
Connection Mode
Enable/Disable
VLAN
WAN Link Status
PPPoE Concentrator
BRAS Connection Status
Authentication Failure
ISP Failure
PPPoE Connection Failure
PON Link Status
7368 ISAM ONT G-240W-C Product Guide
Description
Drop-down menu listing all WAN connections. The connection shown is the
connection for which WAN status will be shown.
Connection mode of the WAN connection
Select this checkbox to enable the WAN connection
VLAN ID
Whether the WAN link is up or down
Displays the PPPoE Access Concentrator (AC) name
This field applies only if the Connection Mode is set to PPPoE
Whether the BRAS connection is connecting or disconnected
Reason for authentication failure: account disabled, account expired, password
expired, authentication failure
Reason for ISP failure: disconnect, time out, server out of resources
Displays USER DISCONNECT when connection failure is due to user
disconnect rather than ISP failure
Whether the PON link is up or down
Edition 01 Issue: 01