Application Configuration; Table 42 Access Control Parameters - Nokia 7368 ISAM ONT G-240W-C Product Manual

Configure a G-240W-C indoor ONT
Table 42
2
3
4
5
6
7
7.2.5
G-240W-C ONT also supports application configuration, including:
•
•
•
•
•
110
R05.05.01 | December 2016 | 3FE 46690 AAAA TCZZA | Edition 01
Access control parameters
Field
WAN
Trusted Network Enable
ICMP, SSH, HTTP, TR-069
Source IP Start
Source IP End
Select a WAN connection from the drop-down menu.
Click to enable or disable Trusted Network.
Select an access control level for each of the four protocols: ICMP, SSH, HTTP, and TR-069
for both the WAN and the LAN side.
Click Save.
Optionally, add one or more subnet trusted networks.
The maximum number of entries is 32.
You can also use the Source IP fields to delete a previously created entry for a subnet trusted
network.
STOP. This procedure is complete.

Application configuration

port forwarding
DDNS
NTP
USB storage
UPnP and DLNA
7368 ISAM ONT G-240W-C Product Guide
Description
Choose a connection from the drop-down menu
Click to enable or disable
Select an access control level for each protocol:
WAN side: Allow, Deny, or Trusted Network Only
LAN side: Allow or Deny
Enter a start IP address for the new subnet trusted network
Enter an end IP address for the new subnet trusted network
Edition 01 Issue: 01